An independent audio meter is also available for each channel.Ĭhannel Matrix is an 8x16 audio router built in to every input. The channel mixer can be used to set the volume level of individual channels.
It works by quickly fading out the audio when it drops below a certain dB (decibel) Threshold The Noise Gate is a handy way of reducing noise on an Audio Input such as a Microphone Any audio above the threshold will be compressed (volume reduced) according to the ratio above. Threshold: Specify the sound level for compression. Ratio: Specify a Ratio other than 1:1 to turn on the compressor. (See below)Ĭompressor is a standard dynamic audio compressor. Select the gain (or amplification) in decibels. See Channel Mixer and Channel Matrix below. The audio from each microphone will be audible on both the left and right channels simultaneously.įor finer control of how different channels are mixed. Separate mono allows you to adjust the volume of both mono channels independently from the Audio Mixer. If you have a Microphone plugged into the left channel or right channel independently. Select the audio channel to use for this input.
These audio meters can be used to monitor the audio audio at the pre-effects stage (for any effects, volume or gain, including delay)Īnd the post-effects stage (after all effects, volume, gain and delay have been applied)ĭisplays the current audio format of the input
AUDIO BAR NOT MOVING IN SOUNDS FULL
Or the headphones icon can be clicked to toggle between full volume (green) and muted (grey). The headphones volume circle can be dragged up to move to the right (more volume) or dragged down to move to the left (less volume). It in your own headphones as the slight audio delay coming from your own microphone can be disorienting.
This is great for situations where you want an audio source such as a microphone audible on the final recording or stream but do not want to hear Each audio input can have its own independent headphones volume set.
0 kommentar(er)
